Container Studio
Laser cut boxes and containers that you can personalize. Pick a type, set the size, put a name or logo on it, and download a cut-ready SVG or DXF. Your first download of each type is free; after that 10 exports are $5, or $19 unlocks unlimited downloads for life.
Wine box
A gift box for one or two bottles, with the lid ready to engrave.
Wine bottle sleeve
A flexing wooden sleeve that wraps a bottle, with a flat front ready to engrave.
Tray
A serving tray with raised end walls and handle cut-outs, ready to engrave.
Organizer box
A stackable open-front bin with a sloped front for parts, screws and tools.
Round box
A round box or lantern from flat staves that lock into a slotted base and ring.
Birdhouse
A finger-jointed nest box or feeder with a lift-off roof, sized for the bird you want.
Toolbox
An open toolbox with raised ends and a carry bar, plus an optional centre divider.
Carrier box
A carry caddy for bottles, cutlery or plants, with a handle divider down the middle.
Tissue box cover
A cover that drops over a tissue box, with an oval opening and a top ready to engrave.
Flap-lid box
A box with one or two flaps that swing open on pivots cut from the box itself.
Pin-hinge box
A keepsake box whose lid pivots on pins cut from the box itself. No hardware.
FAQ
How much does it cost?
Your first download of each box type is free, engraving included. After that, 10 exports are $5, or $19 unlocks unlimited downloads for life. An export covers both the SVG and the DXF of the same design, and downloading it again is free.
Does it work with LightBurn, xTool, Glowforge and OMTech?
Yes. The SVG is in millimetres and imports at true size. Cut lines are red and engraving is filled black. The DXF is R12 for RDWorks and CAD software.
What kerf should I use?
Start with 0.15 mm for a CO2 laser or 0.08 mm for a diode, and cut a test corner. Every part is drawn half a kerf oversize so the joints press-fit.
Are my designs and logos uploaded?
No. The boxes, the engraving and any image you add are all handled in your browser. A saved draft stays on your device so your work survives signing in and checking out.
